Radiographic comparison between cervical spine lateral and whole-spine lateral standing radiographs

Study Design Retrospective radiologic study. Objective The sagittal alignment of the cervical spine can be evaluated using either a lateral cervical radiograph or a whole-spine lateral view on which the cervical spine is included. To our knowledge, however, no report has compared the two. The purpose of this work is to identify the difference in radiographic parameters between the cervical spine lateral view and the whole-spine lateral view. Methods We retrospectively analyzed 59 adult patients suffering from neck pain with cervical spine lateral radiographs and whole-spine lateral radiographs from November 2007 to December 2011. The radiographs were measured using standard techniques to obtain the following parameters from the two different radiographs: occipital–C2 angle, C2–C7 angle, C7–sternal angle, sternal slope, T1 slope, C2 central offset distance, the distance between C2 and C7 plumb lines, C4 anteroposterior (AP) diameter, the ratio of C2 central off distance to C4 AP diameter, the ratio of plumb lines' distance to C4 AP diameter. Results We found that the occipital–C2 angle, sternal slope, and C4 AP diameter were similar, but the C2–C7 angle, C7–sternal angle, T1 slope, C2 central offset distance, distance between C2 and C7 plumb lines, ratio of C2 central off distance to C4 AP diameter, and ratio of plumb lines' distance to C4 AP diameter were different. However, the error of measurement was greater than the small angular and linear differences between the two views. Conclusions Most numerical values of the measured radiographic parameters appear to be different between the two views. However, the two views are comparable because the numerical differences were smaller than the errors of measurement

A simple iterative independent component analysis algorithm for vibration source signal identification of complex structures

ABSTRACT:Independent Component Analysis (ICA), one of the blind source separation methods, can be applied for extracting unknown source signals only from received signals. This is accomplished by finding statistical independence of signal mixtures and has been successfully applied to myriad fields such as medical science, image processing, and numerous others. Nevertheless, there are inherent problems that have been reported when using this technique: insta- bility and invalid ordering of separated signals, particularly when using a conventional ICA technique in vibratory source signal identification of complex structures. In this study, a simple iterative algorithm of the conventional ICA has been proposed to mitigate these problems. The proposed method to extract more stable source signals having valid order includes an iterative and reordering process of extracted mixing matrix to reconstruct finally converged source signals, referring to the magnitudes of correlation coefficients between the intermediately separated signals and the signals measured on or nearby sources. In order to review the problems of the conventional ICA technique and to vali- date the proposed method, numerical analyses have been carried out for a virtual response model and a 30m class submarine model. Moreover, in order to investigate applicability of the proposed method to real problem of complex structure, an experiment has been carried out for a scaled submarine mockup. The results show that the proposed method could resolve the inherent problems of a conventional ICA technique

Fabrication of flexible UV nanoimprint mold with fluorinated polymer-coated PET film

UV curing nanoimprint lithography is one of the most promising techniques for the fabrication of micro- to nano-sized patterns on various substrates with high throughput and a low production cost. The UV nanoimprint process requires a transparent template with micro- to nano-sized surface protrusions, having a low surface energy and good flexibility. Therefore, the development of low-cost, transparent, and flexible templates is essential. In this study, a flexible polyethylene terephthalate (PET) film coated with a fluorinated polymer material was used as an imprinting mold. Micro- and nano-sized surface protrusion patterns were formed on the fluorinated polymer layer by the hot embossing process from a Si master template. Then, the replicated pattern of the fluorinated polymer, coated on the flexible PET film, was used as a template for the UV nanoimprint process without any anti-stiction coating process. In this way, the micro- to nano-sized patterns of the original master Si template were replicated on various substrates, including a flat Si substrate and curved acryl substrate, with high fidelity using UV nanoimprint lithography

Anti-inflammatory activity of cinnamon water extract in vivo and in vitro LPS-induced models

BACKGROUND: Cinnamon bark is one of the most popular herbal ingredients in traditional oriental medicine and possesses diverse pharmacological activities including anti-bacterial, anti-viral, and anti-cancer properties. The goal of this study is to investigate the in vivo and in vitro inhibitory effect of cinnamon water extract (CWE) on lipopolysaccharide (LPS)-induced tumor necrosis factor (TNF)-α and its underlying intracellular mechanisms. METHODS: CWE was orally administrated to mice for 6 days prior to intraperitoneal injection of LPS. Serum levels of TNF-α and interleukin (IL)-6 were determined 1 hour after LPS stimulation. Peritoneal macrophages from thioglycollate-injected mice were isolated and assayed for viability, cytokine expression and signaling molecules upon LPS stimulation. CWE was further fractioned according to molecular size, and the levels of total polyphenols and biological activities of each fraction were measured. RESULTS: The oral administration of CWE to mice significantly decreased the serum levels of TNF-α and IL-6. CWE treatment in vitro decreased the mRNA expression of TNF-α. CWE blocked the LPS-induced degradation of IκBα as well as the activation of JNK, p38 and ERK1/2. Furthermore, size-based fractionation of CWE showed that the observed inhibitory effect of CWE in vitro occurred in the fraction containing the highest level of total polyphenols. CONCLUSIONS: Treatment with CWE decreased LPS-induced TNF-α in serum. In vitro inhibition of TNF-α gene by CWE may occur via the modulation of IκBα degradation and JNK, p38, and ERK1/2 activation. Our results also indicate that the observed anti-inflammatory action of CWE may originate from the presence of polyphenols

Correlation of hypoxia inducible transcription factor in breast cancer and SUVmax of F-18 FDG PET/CT

BACKGROUND: Tumor hypoxia induces the expression of several genes via the hypoxia-inducible transcription factor-1 alpha (HIF-1a). It is associated with the prognosis of several cancers. We studied the immunohistochemical expression of HIF-1a in patients with invasive ductal cancer (IDC) of the breast and the possible correlation with the maximum standardized uptake value of the primary tumor (pSUVmax) as well as other biological parameters. Prognostic significance of pSUVmax and expression of HIF-1a for the prediction of progression-free survival (PFS) was also assessed. MATERIAL AND METHODS: Two-hundred seven female patients with IDC who underwent pretreatment fluorine-18 fluorodeoxyglucose positron emission tomography/computed tomography (F-18 FDG PET/CT) were enrolled. The pSUVmax was compared with clinicopathological parameters including estrogen receptor (ER), progesterone receptor (PR), human epidermal growth factor receptor 2 (HER2), axillary lymph node (LN) metastasis, stage and HIF-1a expression. The prognostic value of pSUVmax for PFS was assessed using the Kaplan-Meier method. RESULTS: pSUVmax was significantly higher in patients with HIF-1a expression ≥ 2 compared to patients with HIF-1a expression < 2 (5.2 ± 4.5 vs. 3.7 ± 3.1, p = 0.008). pSUVmax was also significantly higher in higher stage (p < 0.000001), ER-negative tumors (p < 0.0001), PR-negative tumors (p = 0.0011) and positive LN metastasis (p = 0.0013). pSUVmax was significantly higher in patients with progression compared to patients who were disease-free (6.8 ± 4.4 vs. 4.1 ± 3.7, p = 0.0005). A receiver-operating characteristic curve demonstrated a pSUVmax of 6.51 to be the optimal cutoff for predicting PFS (sensitivity: 53.6%, specificity: 86.0%). Patients with high pSUVmax (> 6.5) had significantly shorter PFS compared to patients with low pSUVmax (p < 0.0001). CONCLUSIONS: pSUVmax on pretreatment F-18 FDG PET/ CT reflect expression of HIF-1a and can be used as a good surrogate marker for the prediction of progression in patients with IDC. The amount of FDG uptake is determined by the presence of glucose metabolism and hypoxia in breast cancer cell

Spatiotemporal Characteristics of Neural Dynamics in Theta Oscillations Related to the Inhibition of Habitual Behavior

The human brain carries out cognitive control for the inhibition of habitual behaviors by suppressing some familiar but inappropriate behaviors instead of engaging specific goal-directed behavior flexibly in a given situation. To examine the characteristics of neural dynamics related to such inhibition of habitual behaviors, we used a modified rock-paper-scissors (RPS) task that consisted of a basic, a lose-, and a win-conditioned game. Spectral and phase synchrony analyses were conducted to examine the acquired electroencephalogram signals across the entire brain during all RPS tasks. Temporal variations in frontal theta power activities were directly in line with the stream of RPS procedures in accordance with the task conditions. The lose-conditioned RPS task gave rise to increases in the local frontal power and global phase-synchronized pairs of theta oscillations. The activation of the global phase-synchronized network preceded the activation of frontal theta power. These results demonstrate that the frontal regions play a pivotal role in the inhibition of habitual behaviors-stereotyped and ingrained stimulus-response mappings that have been established over time. This study suggests that frontal theta oscillations may be engaged during the cognitive inhibition of habitual behaviors and that these oscillations characterize the degree of cognitive load required to inhibit habitual behaviors

Catalytic Performance for Hydrocarbon Production from Syngas on the Promoted Co-Based Hybrid Catalysts; Influence of Pt Contents

Fischer-Tropsch synthesis (FTS) reaction from syngas was investigated on the Pt-promoted cobalt-based hybrid catalysts prepared by co-precipitation method in a slurry of ZSM-5 (Si/Al=25). The hybrid catalysts were compared with each other for the different content of Pt as a promoter and are characterized using BET, XRD, H2-TPR and NH3-TPD. Their physicochemical properties were correlated with the activity and selectivity of the catalysts. As results, all hybrid catalysts show the C5-C9 yield (%) higher than that of Co-Al2O3/ZSM-5 catalyst. The Pt-promoted hybrid catalysts were found to be more promising towards production of the hydrocarbons of gasoline range and over C10.